Irrigation pipes and fittings are sold at Aqua Hub LTD for different prices depending on roll length and diameter size. Prices may vary for the various types of pipes whether HDPE, PVC, driplines rain hose pipes, or soft hose pipes.
Most farmers struggle to get the right pipes for irrigation at convenient prices. This article covers everything about the best pipe suppliers, ideal prices, and how to use various irrigation pipes in Kenya.
Where to Buy Irrigation Pipes and Fittings in Kenya
Aqua Hub LTD
Call 0790719020
Cost of Irrigation Pipes and Fittings in Kenya
The cost of irrigation pipes and fittings varies depending on the type and size.
PVC Pipes and fittings Price
PVC pipes and fittings are sold at the following prices.
The cost of PVC Pipes and fittings varies depending on the length and diameter size.
Prices range between KES 350 to KES 15,000 for a diameter size of 20 mm to 310mm.
HDPE Pipes Prices
HDPE Pipes and fittings come at the following cost per square meter:
|
Size in (mm) |
Cost (KES) |
|
16mm |
KES 1,500 |
|
20mm |
KES 2,700 |
|
25mm |
KES 3,000 |
|
32mm |
KES 4,100 |
|
40mm |
KES 5,890 |
|
50mm |
KES 8,000 |
|
63mm |
KES 12,500 |
|
75mm |
KES 18,000 |
|
90mm |
KES 26,000 |
|
110mm |
KES 40,000 |
Rain Hose pipes prices
Depends on the diameter sizes available. Cost of 100m roll are below;
- 32 mm KES 2,800
- 40mm KES 3,700
- 50 mm KES 4,800
Dripline Prices
The cost of Driplines in Kenya is KES 8,500 for a full roll of 1000m.
Average Cost of Complete Irrigation Systems
- Drip irrigation systems – can cost between KES 80,000 to KES 200,000 per acre.
- Sprinkler irrigation – KES 20,000 to KES 120,000 inclusive of pumps
- Rain Hose Systems – KES 30,000 to KES 85,000
Irrigation Pipes and Fittings Technical Data
- Irrigation pipes are available in diameter sizes of 20mm to 110 mm
- Irrigation fittings exist in diameter sizes ranging from 20 mm to 110mm.
- Made from plastic materials
Why Irrigation Pipes and Fittings are Important for Agribusiness in Kenya
The Kenyan climate does not favor all-season production, the reason why irrigation farming comes as a solution. High-quality irrigation pipes and fittings are reliable in connecting drip irrigation systems.
You produce higher crop yields with the right pipes and fittings since irrigation can optimize production. High-end irrigation systems such as drip irrigation implement different pipes and fittings and prove dependable to mitigate drought challenges in agriculture.
Which Types of Irrigation Pipes and Fittings are used in Kenya?
PVC: Popular for use as irrigation water supply because they are economical, light and easy to use.
HDPE Pipes: Type of pipes that are known to handle high-pressure, high hot or cold environments and mechanical damage.
Low Density PE: low-density LDPE pipes thus suitable for drip irrigation systems as risers to connect driplines.
Driplines: thin-walled pipes that resemble a tape but are perforated to supply water to root zones of crops through a dripping effect.
Lay flat Hose Pipes: connection pipes for irrigation systems such as rain guns. Easy to adjust, install and transport.
Common Irrigation Fittings in Kenya
Elbow Fittings :
used to change the course of the pipeline in case of corners or barriers. Available in 45° and 90° angles.
Tee fittings:
To allow water to flow into two opposite directions in a farm. Common types are equal tee and reducing tee.
Coupling Fitting
connects two pipes with the same diameter to extend the length of the irrigation line. Include compression couplings and slip couplings.
Adapter fittings:
their design allows to connect pipes of different sizes or material. For example transitioning from a PVC to HDPE.
Examples are male or female adapters (threaded on one side) and barb adapters for flexible hose pipes.
End Caps:
fittings for sealing the ends of irrigation or water supply pipes to prevent water from flowing out.
Control Valves:
to regulate the flow of water in an irrigation system. Ball valves control the amount of water in various pipe sections.
Saddle Clamp:
fixed bracket-type fittings that prevent shaking and movement of irrigation pipes.
Drip Fittings:
Connects driplines to HDPE pipes and delivery pipes. Start connectors, middle connectors, drip valves, and drip end caps.
What Matters Buying Irrigation Pipes and Fittings in Kenya
Irrigation pipes and fittings are available in varying sizes, types, and pressure ratings. Therefore, they have different irrigation utilities which could be unique from one fitting to another.
Depending on the part of the irrigation system that a pipe is applicable, size will vary. For instance, the mainline pipe for drip irrigation is bigger than sub mainline pipe.
The type of irrigation system gives the pressure requirement and the pipe size with the pressure nominal needed.
You also must look at the scenario in which the pipes are used or the application complexity. With high-pressure irrigation systems, you should choose high-performance pipes such as HDPE.
Durability is also important when you are doing long-term irrigation projects to ensure you cut down the costs of maintenance.
Other important factors include the cost of the pipes, quality, and ease of installation. Go for affordable but quality pipes that can also be easily set up.
How to Get the Best Prices for Irrigation Pipes and fittings in Kenya
Aqua Hub Ltd deals in quality irrigation Pipes in Kenya. We are the top rated company offering reliable irrigation materials including sprinklers, driplines, and agricultural nets.
Call 0790719020
